How Effective is X-431 EURO TAB III As a Remote Diagnostic Scan Tool Tablet?

3 min readAug 1, 2023

The X-431 EURO TAB III is a brand-new, high-end, Android-based auto fault diagnostic tool from Launch. It carries on Launch’s several advantages in terms of automotive fault diagnostic technologies, such as broad model coverage, strong capabilities, a variety of specialised features, and precise test results. By connecting the car diagnosis connection to mobile intelligent terminals through Bluetooth, automotive fault diagnosis may be implemented for all automobile models and systems. The X-431 EURO TAB is even offering applications for sensors, oscilloscopes, multimeters, endoscopes and battery detection along with extension modules.

Among comparable products, the hardware combinations for the X-431 EURO TAB III are superior: Machine passed the IP65 test; 10.1 inch IPS high definition capacitive screen; 8 core 2GHz CPU; 2G RAM; and 64G memory

Everything Included In X-431 EURO TAB III :

1 diagnostic connector, 1 micro USB cable, and 1 lighter cable.
One 5V DC out power adapter; one HDMI cable; and one cable for battery clamps
1 × Extension Cable for OBD II
1 Non-16pin connections set; 1 Non-16pin connector converting cabel; 1 password envelope.

Its Features Are -

10.1′′ IPS screen,
19201200 high-resolution, multi-point touch,
Android 6.0 system,
More than 76 % coverage (under certain situations),
Real-time remote diagnosis via WiFi,
One-click software upgrade,
Multi-purpose charging dock.
Battery, 15,000 mAh

Specifications:

Specifications include the following: 10.1-inch IPS screen, 1920 x 1200 resolution; eight-core 2GHz processor; Android 6.0 operating system; 2G RAM; and 64G SSD storage.
WiFi (802.11 b/g/n) WLAN
Bluetooth 2.0, USB 2.0, working temperatures between -10°F and +55°F, and storage humidity between 20% and 90%.
Battery: 15000mAh lithium-polymer battery
Camera: Front 2.0M, rear 8.0M, AF with a torch
Storage temperature: -20+70oC
Audio input/output: Microphone, Speakers, 3.5mm stereo headphone jack
Video output: HDMI
Supported languages include English, Chinese, and others depending on the car manufacturer. For languages other than English or Chinese, there are fees.
Video output: HDMI
Coverage of software: Australian: AUST Ford and Holden
Asian automakers include Toyota/Lexus, Honda/Acura, Mazda, Subaru, Nissan/Infiniti, Hyundai, Isuzu, Daihatsu, KIA, Daewoo, Suzuki, Proton, Tata, Mahindra, Ssangyong, Perodua, Maruti
European automobiles include the following: Audi, Mercedes/Maybach, BMW/MINI/Rolls Royce, VW/Bentley/Bugatti, Opel/Vauxhall, Peugeot, Citroen, Volvo, Sprinter, Renault/Dacia, Fiat/Romeo/Abarth/Lancia, Rover, Land Rover, Saab, Seat, Skoda, Smart, Maserati, Ferrari, Aston Martin, Porsche, Jaguar
USA: USA GM/Buick/Cadillac/Chevrolet, Chrysler/Dodge/Jeep, Ford/Lincoln
Chinese: Futian, Changan, Changhe, Haifei, Qirui_TY (Cherry), Changcheng (Great Wall), etc.
Immobilizer/Key, Injector, Special Reset the TPMS, Electronic Throttle Relearn, Reset the DPF, Reset the SAS, Reset the oil, Reset the brake, and Reset the BMS.
Free software downloads for two years

Launch O2–1 four-channel oscilloscope is included.

The Launch oscilloscope is relatively simple to learn how to use when using the most recent software, and automatic pre-sets for many automotive applications make setup a breeze. Presets can be used in combination mode to simultaneously test multiple components.

The Launch TSGUN and four TPMS sensors are included.

All sensor data can be read by the TS Gun, Launch sensors can be programmed, and TPMS fault codes can be identified.

A recently created high-end automobile diagnostic tool is called the Euro Tab III. The Euro Tab III, which runs on the Android 9.0 operating system, enhances the well-known Launch diagnostic technology and provides extensive special features, global car coverage, and strong diagnostics. The Smartlink® C VCI is a new feature for the Euro Tab III. This sophisticated module enables expanded functionality and connectivity in several ways. The Smartlink® C, which has a 4.0-inch screen, can communicate with a vehicle directly for local diagnosis, remotely for Launch SRD diagnosis (Launch Super Remote Diagnosis), and as a pass-through device using the J2534, D-PDU, and RP1210 protocols. It is also compatible with DOIP (Diagnosis over the Internet protocol) and CAN FD (flexible data rate). With the help of the optional HD truck software, the Smartlink® VCI also offers truck diagnostics. The diagnostic software on the Euro Tab III fully integrates the Launch professional database. This will take you straight from the DTC to a testing procedure that leads to the resolution of the fault code.